Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V / DC 36V-110V for Nema 34 Mot

Description

Y Series Digital Stepper Driver 2.4-7.2A AC18V-80V / DC 36V-110V for Nema 34 Mot
Mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effective in applications where users expect low heat, low noise, low vibration, high stability, and high precision.
Key Features:
A new generation of 32-bit DSP control technology, cost-effective, stable and excellent vibration performance
With 16 equal angle constant torque subdivision, up to 256 subdivisions
The current control is smooth, precise, and the motor heat is small
The highest impulse response frequency is up to 200KHz
When the step pulse stops for more than 200ms, the motor current is halved.
Excellent smoothness in low frequency subdivision
Optically isolated differential signal input, strong anti-interference ability
The drive current peak is adjustable below 7.2A
Voltage input range: AC18~80V/DC 36V-110V
With over voltage, under voltage and other error protection
Very small size, volume 151*94*54 (mm), weight 0.5kg
Electrical Specifications:
Output Peak Current: 2.4 - 7.2 A（2.0~6.0RMS）
Input Voltage: AC18V~80V/DC 36V-110V
Logic Signal Current: 7 - 15 mA (Typical 10 mA)
Pulse Input Frequency: 0 - 200 kHz
Pulse Width: 2.5μS
Isolation Resistance: 500 MΩ
Operating Environment and other Specifications(Tj = 25℃/77℉):
Cooling: Natural Cooling or Forced cooling
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0 － 65 ℃
Humidity: 40% － 90% RH
Operating Temperature: 50 ℃ MAX
Vibration: 10-50Hz/0.15mm
Storage Temperature: -20 － 65 ℃
Weight: Approx.500 g (17.64 oz)