Wavtech link2 2ch LOC w/ Load Sense

Description

Product highlights
active 2-channel line output converter
designed to work with factory systems
provides up to 10Vrms output
speaker-level inputs only
selectable speaker-level input sensitivity (20V or 40V) via internal jumper
auto turn-on via DC offset or audio detect
gain control and clip light
12-volt turn-on lead output
aluminum chassis
speaker-level inputs feature load resistance to prevent factory stereo shut-down
optional plug-in parallel load resistors available for vehicles like some newer Chrysler vehicles that need less resistance for the factory stereo's load-sensing to work
wiring, fuse, and hardware not included with device
18-gauge power and ground leads and a 1-amp fuse recommended
dimensions (not including terminals and jacks): 2-1/2"W x 1-1/8"H x 2-15/16"D
warranty: 1 year
What's in the box
2-Channel line output converter
2 Phoenix terminals (installed)
2 Mounting tabs (installed)
Two ½" Screws
Ground ring terminal
Owner's manual
About this item
Written by Crutchfield's Buck Pomerantz
Getting a strong clean signal from a factory stereo
Your aftermarket processors and amplifiers need clean and robust line-level input signals, especially when getting them from a factory radio's speaker outputs. Wāvtech's link2 line output converter can produce up to 10 volts of output — plenty enough for your aftermarket gear to work with.
Works with factory amps too
Those speaker-level inputs can handle up to 40 volts, the equivalent of 400 watts, so you can use one in a premium system with a factory amplifier. This way, you retain all your vehicle's factory audio options and warnings. The link2's gain control and clip light help you keep the signal level under control and distortion-free.