-40%
Wavtech IRAD Ignition Generation/Remote Delay
$ 17.65
- Description
- Size Guide
Description
Product highlightsprovides 12-volt output for remote turn-on
adjustable delay to avoid on/off pop
relay/solenoid control for a secondary battery in start/stop engine systems
locking detachable wiring terminals
aluminum chassis with detachable mounting tabs
dimensions (without terminals): 1-1/2"W x 13/16"H x 1-1/2"D
warranty: 1 year
What's in the box
Ignition-Remote Generator
2 Phoenix terminals (installed)
2 Mounting tabs (installed)
Two ½" Screws
Ground ring terminal
Owner's manual
About this item
Written by Crutchfield's Buck Pomerantz
Integrating with a digital factory system
Let's say you want to put in your own aftermarket amplifier to upgrade your factory radio, but the system uses a digital data-bus for all its controls so there's no 12-volt trigger wire to use for the new amp's remote turn-on signal. W&amacrvtech's IRAD solves that problem and more, allowing you to add:
a switched 12-volt output, that turns on and off with the car's ignition;
a remote 12-volt output with adjustable delay, for avoiding on/off pop;
a relay/solenoid control for a secondary battery that can overcome some of the issues experienced in start/stop engine systems by triggering a couple of relays and a solenoid (sold separately) to isolate the two batteries when cranking, connecting them together while running, and isolating them again when parked.