Velmex Programmable 3-Unit Stepping Motor Controller - 120 Volt AC NF90-2

Description

Velmex NF90-2 Programmable 3-Unit Stepping Motor Controller - 120 Volt AC
Velmex NF90-2 Programmable 3-Unit Stepping Motor Controller - 120 Volt AC
The NF90 is a programmable stepping motor controller for running up to three motors, one-at-a-time. The Controller incorporates a single chip "Super Microprocessor" that has on-chip RAM. The RAM is available for temporary storage of a user-entered program and motion parameters. Commands and data are entered through the RS-232-C interface from a host computer, terminal, or programmable controller. Specialized Commands provide simple and efficient entry of a complex, yet compact, program.
Completely wired and tested for direct connection to UniSlide motors/ assemblies.
A complete microprocessor-based Controller with motor drives for three motors.
400 steps per revolution (0.9o step angle) resolution
Output current is factory matched for a specific motor (0.7 to 4.7 amp/phase motor).
An all metal enclosure and Linear type motor and logic power supplies result in low RFI and EMI.
95-130 VAC, 50/60 Hz operation. 190-260 VAC, 50/60 Hz operation with European fuses is available.
JOG/slew mode allows motors to be jogged one step or slewed up to 1000 steps/sec. or 2000 steps/sec.(switch settable). An optional joystick is available.
A Digitizing function can be utilized with a host terminal connected as a readout of motor position.
A three wire serial port, conforming to EIA standard RS-232-C, allows a host to enter Commands (ASCII characters) and Data, Poll for status, and Read Position information.
The NF90 will run in an interactive or stand-alone mode.
Acceleration/Deceleration settable from 2,000 to 100,000 steps/sec2 in 2,000 step/sec2 increments.
This used motor controller has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. Please view our photo set and contact us if you have any questions.
Condition:
Used
This used motor controller has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE ITEMS
Shipping
Best Offers
Returns
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Satisfaction
Guaranteed
Fast Shipping
Customer Support
Click here to see description
Velmex NF90-2 Programmable 3-Unit Stepping Motor Controller - 120 Volt AC
Velmex NF90-2 Programmable 3-Unit Stepping Motor Controller - 120 Volt AC
The NF90 is a programmable stepping motor controller for running up to three motors, one-at-a-time. The Controller incorporates a single chip "Super Microprocessor" that has on-chip RAM. The RAM is available for temporary storage of a user-entered program and motion parameters. Commands and data are entered through the RS-232-C interface from a host computer, terminal, or programmable controller. Specialized Commands provide simple and efficient entry of a complex, yet compact, program.
Completely wired and tested for direct connection to UniSlide motors/ assemblies.
A complete microprocessor-based Controller with motor drives for three motors.
400 steps per revolution (0.9o step angle) resolution
Output current is factory matched for a specific motor (0.7 to 4.7 amp/phase motor).
An all metal enclosure and Linear type motor and logic power supplies result in low RFI and EMI.
95-130 VAC, 50/60 Hz operation. 190-260 VAC, 50/60 Hz operation with European fuses is available.
JOG/slew mode allows motors to be jogged one step or slewed up to 1000 steps/sec. or 2000 steps/sec.(switch settable). An optional joystick is available.
A Digitizing function can be utilized with a host terminal connected as a readout of motor position.
A three wire serial port, conforming to EIA standard RS-232-C, allows a host to enter Commands (ASCII characters) and Data, Poll for status, and Read Position information.
The NF90 will run in an interactive or stand-alone mode.
Acceleration/Deceleration settable from 2,000 to 100,000 steps/sec2 in 2,000 step/sec2 increments.
This used motor controller has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. Please view our photo set and contact us if you have any questions.
Condition:
Used
This used motor controller has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE ITEMS
We have
IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an
OFFER
on this item and you do not see a
MAKE OFFER
button, please use the
CONTACT SELLER
link at top right under our username. ​​​​​​​
Shipping
Returns
Best Offers
30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA.  Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you.  All items are shipped from our warehouse in Ventura, CA USA.
​​​​​​​
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Customer Support
Satisfaction
Guaranteed
Fast Shipping
On Mar-01-21 at 02:45:20 PST, seller added the following information: