US丨4 Axis Nema23 Single shaft Stepper Motor 290oz-in/200w &Driver 4A USB CNC Kit

Description

Store category
Sign Up Now !
You may also like
【Free Ship】4Axis Nema 23 Stepper Motor 290oz-in & Driver Board&Power CNC Kit
Product Description
This item includes:
4 pcs Nema 23 stepper motor 290 oz.in single shaft,6LEADS
1 pc 4-axis driver board TB6600 peak 3.5A, 32 micsteps, widely used in CNC hobby, easy to operate
1pc Power supply 200W-24V
including the USB cable + CD
Detail information
1. Nema 23 stepper motor :
Step angel (°)
Motor Length L(mm)
Rate Voltage (V)
Rate Current (A)
Phase
Resistance (Ω)
Phase Inductance (mH)
Holding Torque (Nm)
Lead Wire (NO.)
Rotor Inertia (g.cm2)
Detent Torque (kg.cm)
Motor Weight (kg)
1.8
76
8.6
1.0
8.6
17
2.0
6
480
0.6
1.00
2. 4-axis driver board TB6600
Product Features:
TB6600 chip - High power, maximum 4A drive current chipset.
1-32 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step.
Adjustable 0.5A-4A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
*Attention: This driver is the 0.5A-4A version. It's specially designed for stepper motors with rated current from 0.5A to 4A. It's NOT compatible with stepper motors with rated current below 0.5A or above 4A.
Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment.
On board current switching - Power output can be set according to specific user requirement.
Full closed-type optical isolation to protect the user's computer and equipment.
Relay spindle interface - Outputs Max. 40V for spindle motors or coolant pump (only one device can be powered by this output!)
3 channel inputs interface- Can be used for XYZ limit and emergency stop.
Professional design - Two stage signal processing with super anti-jamming.
Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect.
Four-input Control; Allow setting the Limit, Emergence-Stop, Midpoint-Alignment, Cutter-Alignment.
*For compatibility with other softwares, please feel free to contact us.
Dip settings:
Current Setting
1
2
Decay Mode Settings
3
4
MicroStep Settings
5
6
100%
ON
ON
FAST
ON
ON
1
ON
ON
75%
ON
OFF
25%
ON
OFF
1/2
ON
OFF
50%
OFF
ON
50%
OFF
ON
1/8
OFF
ON
25%
OFF
OFF
SLOW
OFF
OFF
1/16
OFF
OFF
1.
Motor wiring connection is right.
2
.
the f
our axis driver card must be set up according to the requirements of our product manual.
E
specially
motor outputs
and
output singnals
settings according to
our product manual is right.
3.
You must use the XP system desktop computers.
You can only use the USB conversion card
4.
the f
our axis driver card need use software.
If you have problem when setting,please send e-mail to me.
3. Power supply
:
The power is 200watts, and the output volatage is 24VDC
WIRING DIAGRAM
(This is just a reference of wiring for our customers) :
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment only
Payment must be received within 7 days after order is made.
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Apr-08-21 at 00:47:20 PDT, seller added the following information: