Leadshine 3ND583 3-Phase CNC Microstepping Stepper Driver 50V DC 3.8A

Description

Leadshine 3ND583 3-Phase CNC Microstepping Stepper Driver 50V DC 3.8A
Product Description
The 3ND583 is a high resolution 3-phase microstepping driver based on precision current control technology. It’s suitable for driving 3-phase hybrid stepping motors from NEMA size 17 to 34. By using the advanced pure-sinusoidal current control technology, both the noise and vibration of the stepping motor have been greatly reduced, which makes the stepping motors offer servo-like performances. Compared to the 3MD560, it’s lighter and smaller, and compared to most of the microstepping drivers in the market, both driver heating and motor heating have been reduced by 15-30%.
Product Feature:
High performance, low noise and lost cost
Low driver heating and low motor heating
Supply voltage up to 50 VDC
Output current up to 8.3A (RMS 5.9A)
Input signal TTL compatible
Automatic idle-current reduction
Suitable for 3-phase stepping motors, including 3 lead and 6 lead motors
Optically isolated differential input signals, pulse frequency up to 300 KHz
8 selectable resolutions up to 10000 steps/rev
DIP switch current setting with 16 different values
PUL/DIR & CW/CCW modes optional
Over-voltage, short-voltage, over-current and short-circuit protection
Small size for easy mounting
Item Specification:
Parameters
Min
Typical
Max
Unit
Output current
2.1
- 8.3
(5.9 RMS)
A
Supply voltage
20
36
50
VDC
Logic signal current
7
10
16
mA
Pulse input frequency
0
-
300
KHz
Isolation resistance
500
MΩ
Package Included:
1 x Leadshine 3ND583 3-Phase CNC Microstepping Stepper Driver 50V DC 3.8A