EWK Car Windshield Chip Repair Kit Auto Windscreen Glass Crack Filler Patch Kit

Description

Instructions
Step 1.
Clean the surface of the crack and align the center of the repair device with it.
Step 2.
Screw the resin chamber into the repair device and drop proper amount of resin into it.
Step 3.
Press the pressure driver into the resin chamber to push the resin into the crack and wait for it to dry.
Step 4.
Remove the repair kit and wipe away excess resin.
Step 5.
Apply some resin to the crack and put a curing strip on it to make a coating over the top.
Step 6.
Leave it under the sunlight / UV light for 5-20 minutes to let it cure and then use a razor blade to scrape off the hardened resin.
Contents
A. Curing strips
B. Repair device x1
C. Sleeved razor blade x1 Contents
D. Resin x1
E. Resin chamber x1
F. Pressure driver x1
Workable For
Chips, cracks, stars, bullseyes, spider webs and other forms of damage that are not bigger than Ø2.54cm, or not longer than 30.48cm.
Reminder
The repair kit is NOT workable for cracks that already spread too large or become an opening hole.