CNC Geckodrive G-213V +Extras Stepper motor Driver Gecko Router Mill Microsteps

Description

These Come with a ONE YEAR Factory ONLY Warranty  if you receive a defective Gecko Drive (which is VERY rare)  You need to log onto Geckodrive.com and fill out their RMA form, then send the drive to them for replacement or repair allow a few days, after they have checked the Driver, for return of repaired or replaced product.  By Purchasing these Drivers you agree to the above
You are buying ONE  Brand new Fresh from the Factory Geckodrive G-213V with MICROSTEPPING
Due to my volume buying power, you can buy this for less from me.Besides having a great price, i include
EXTRAS.
I also include a complete amp control resistor set required by this driver to set the amps for your motor. This set sells for .99 in my store and has 12 amp range sizes.for your motor amps setting.
The G213V is Geckodrive's toughest drive with a step pulse multiplier, allowing it to run in full step, half step, 5 microstep and 10 microstep modes. Designed with the intention of creating an indestructible stepper controller, no protection was left out of the production model. Where most other drives would be damaged or potentially destroyed the G203V will survive. Because of its CPLD architecture we can offer three different versions of the drive, all with the same level of protection.
You also receive a manual on CD
Specifications (Click any underlined feature for a more detailed explanation):
7A 80VDC Power Ratings
Full  step, half step 5 microstep and 10 microstep selectable resolution
Mid-band resonance damping
Short-circuit protection
Reversed-polarity protection
Over-Temperature protection
Over-voltage protection
Optoisolated STEP, DIRECTION and DISABLE inputs
Optoisolated COMMON is ground
2.5V, 3.3V and 5V logic compatible inputs
Recirculate mode while motor is stopped
350 kHz maximum Step pulse frequency
Morphs to full step at higher speeds to maximize motor torque
Top settable adjust trimpot
Power and error LED indicators
Internal socketed fuse
Power-on reset
20 kHz switching frequency
Same size and terminal pin-out as the G201
PROBLEMS with the Shipment -- Communicate with us ONLY BY
EBAY MESSAGE.
DO NOT communicate with the paypal email
beginning alice.hubbard, this is an order
Depository email only, we do not monitor it.
Important note about SHIPPING:
·
ON
Multiple item orders only,
NOT on single item orders
,
SHIPPING COST totals can become UNREASONABLY HIGH due to the necessity for Ebay to add up all of the individual shipping costs for an estimated “not to exceed” total ship cost.
A high ship cost total on your order will be corrected by us, but only if you place your multiple order and WAIT to PAY,  UNTIL after we send you an invoice with COMBINED shipping.
Don’t use a cart
to order your multiples because it forces you to pay immediately on checkout, and, we can’t then invoice you for combined shipping on your order once you have paid.
Thanks for reading and be sure to Google Hubbard CNC to see our glowing reviews and other spectacular deals we have online!
THE MESSAGE ABOVE ONLY APPLIES TO PEOPLE ORDERING MORE THAN ONE TYPE OF ITEM FROM OUR STORE!