-40%
Aux In Adapter iPad iPod iPhone Charging Cable for 2002-2006 Mazda Tribute
$ 18.9
- Description
- Size Guide
Description
Aux In Adapter iPad iPod iPhone Charging Cable for 2002-2006 Mazda TributePart Number:
i-4-9
Description
TITLE:
iPod Auxiliary Input Module for Mazda Factory Radios.
DESCRIPTION
: Plugs into Specific Factory Mazda Radios and iPod.
FEATURES:
Provides an Auxiliary Audio Input to your factory car stereo.
Connect your iPod/iPhone directly to this module from the bottom dock connector.
It also has a 3.5mm (headphone jack) to allow you to connect a MP3 player or other device with a 3.5mm connector.
The iPod port and the 3.5mm port are toggled using the track up and down functions on your stereo.
Control remains on your iPod, iPhone, or iPad. No text will display on the stereo.
SIMPLE INSTALLATION:
This item plugs into the back of the factory stereo.
It?s a plug and play item.
Power up the stereo and select the auxiliary mode on your stereo.
The device should play.
IPOD/IPHONE COMPATIBILITY
This module works with all iPods, iPhones, and iPads with the dock connector.
This item charges all iPods as well.
It has the 5V charging ability unlike other sellers ipods.
Occasionally, the message that the accessory is not made for iphone may appear.
Select no when asked to enter airplane mode and your iphone will function as normal.
VEHICLE COMPATIBILITY**
2005-2008 Mazda 2
2004-2008 Mazda 3
2006-2009 Mazda 5(without entertainment system)
2006-2008 Mazda 6 (see note 3)
2009 Mazda 6(Panasonic)
2003-2008 Miata/MX5(non Bose)
2002-2006 SPD
2002-2003 Protégé
2007-2008 CX7 (non Bose)
2004-2008 RX8(see note 4)
2002-2006 Tribute
2002-2008 Premacy
1999-2003 Mazda 323
2002-2011 MPV
2003-2006 B-Series Pickup
1: Fits following head units: 1168, 1269, 4103, 14789909, 1472086, 14792089, 14794008, 14794522, 14795137,
CQ-EM4570AK, CQ-LM4720A, CQ-TT3070AA, CR-LM4282KA, CR-LM4282KA CD, CQ-XM8950A
2:Not compatible with Navigation radios. Not compatible with MX5 with Bose Sound System;
3: Not all Mazda 6 supports external CDC connection, internal modification might be needed; Mazda 6, produced from
Nov. 2003 to Sep. 2005, needs to solder a jumper or a 0-ohm chip register on location L716 in its head unit.
4: RX-8 radio firmware version must be v9.55 or later, v10.1 and v9.81 not supported. (Note to check the radio firmware is available).
5. Does not work with iPhone 5 (Can be connected only via AUX)
Specification:
Voltage Input : 12V DC
Signal-to-Noise : 95DB
Max. Current : 600MA
Max. Voltage output : 12V
D/A Device : 24BIT 192KHZ
Total Harmonic Distortion : 0.01%
Frequency Response : 20HZ-20KHZ
Working Temperature : -10C- 80C
Additional Images