Airsoft Lipo Battery - 1300mah 3S (11.1V) 25C BRICK style

Description

Specification:
Output: 11.1V(3S1P)1300mAh
Rating: 25C continuous,45C burst
Dimension: 18x30x93mm
***NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle mend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Do not use the battery at insufficient of voltage.
Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.
*** DISCLOSURE: Make sure you know what type of battery you need for your Airsoft gun.
DO NOT
try to MAKE IT fit as the connectors may detach and become damaged. Make sure you know how long your battery should be charged. A charging battery should not be left unattended unless you have a smart charger as overcharging will result in damage/overheating of battery. Li-Po batteries are dangerous and can catch on fire. This is not a battery for beginners and should be in sight at all times while charging. ***