7 HP 2 Stroke Outboard Motor Tiller Shaft Boat Engine Water Cooling CDI System

Description

7 HP 2 Stroke Outboard Motor Tiller Shaft Boat Engine Water Cooling CDI System
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Technical Parameters
Short shaft: 40cm
Dimension
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Performance
Full throttle operating range 5000-6000r/min
Maximum output 7HP
Idling speed ( in neutral) 1000
±
100 r/min
Engine
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt
Drive unit
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)
Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
Notice:
Please
add gear oil to the gears before use the motor and replace gear oil after the run-in period（10hours）. (
if you do not know how to handle this, please contact with us )