5pcs Stepping Motor Driver Stepstick ST820 Smallest 45V Microstepping

Description

5pcs Stepping Motor Driver Stepstick ST820 Smallest 45V Microstepping
5PCS Stepping Motor Driver Stepstick ST820 Smallest 45V Micro-stepping Peak Current 2.5A RMS Current 1.5A For RAMPS VS TMC2100 Product Introduction: ST820 is a compact and easy to use evaluation board for the STSPIN820, the world’s smallest 45 V micro-stepping motor driver rated at 2.5 A.It provides a very compact solution to evaluate the performance of the STSPIN820 stepper motor driver with a minimum set of additional equipment and without the need of additional devices. The hardware is fully compatible to be used together with RAMPS or other similar FFF 3D printing platforms, representing a very fast drop-in replacement of similar solutions. Contrary to most other competitor’s solutions, it helps customers to really exploit the benefits of working at high micro stepping resolution. The micro-stepping resolution can be easily set to one of eight available values through M1, M2 and M3 inputs: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step. It is simply controlled through step and direction ports and embeds the PWM current control algorithm with selectable decay mode (fast + slow or slow) and the adjustable reference voltage level through an embedded potentiometer. The STSPIN820 features a full set of protections making it a bullet proof device for a wide range of industrial applications. Major Features : Operating voltage:7 V to 45 V Continuous current up to 1.5 A per phase Maximum current up to 2.5 A per phase Integrated low RDS(ON) power stages (HS + LS = 1 Ω typ.) Microstep resolution easily settable through jumpers: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step Simple step and direction control interface Adjustable current control through a potentiometer to set the ref. voltages Embedded PWM current control with selectable decay mode (fast or slow) Full set of embedded protections 1. non-dissipative overcurrent 2. Undervoltage lockout 3. Thermal shutdown 4. Short-circuit Compatible with RAMPS and similar open-source solutions for FFF 3D printers Very compact footprint: 15 x 20 mm Package: 1*ST820 1*Heatsink Note : ST820 drivers need firmware adjustments to function, if you need more information,pls contact us!
5pcs Stepping Motor Driver Stepstick ST820 Smallest 45V Microstepping
5PCS Stepping Motor Driver Stepstick ST820 Smallest 45V Micro-stepping Peak Current 2.5A RMS Current 1.5A For RAMPS VS TMC2100
Product Introduction:
ST820 is a compact and easy to use evaluation board for the STSPIN820, the world’s smallest 45 V micro-stepping motor driver rated at 2.5 A.It provides a very compact solution to evaluate the performance of the STSPIN820 stepper motor driver with a minimum set of additional equipment and without the need of additional devices. The hardware is fully compatible to be uséd together with RAMPS or other similar FFF 3D printing platforms, representing a very fast drop-in replacement of similar solutions. Contrary to most other competitor’s solutions, it helps customers to really exploit the benefits of working at high micro stepping resolution. The micro-stepping resolution can be easily set to one of eight available values through M1, M2 and M3 inputs: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step. It is simply controlled through step and direction ports and embeds the PWM current control algorithm with selectable decay mode (fast + slow or slow) and the adjustable reference voltage level through an embedded potentiometer. The STSPIN820 features a full set of protections making it a bullet proof device for a wide range of industrial applications.
Major Features :
Operating voltage:7 V to 45 V
Continuous current up to 1.5 A per phase
Maximum current up to 2.5 A per phase Integrated low RDS(ON) power stages (HS + LS = 1 Ω typ.)
Microstep resolution easily settable through jumpers: full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/128 and 1/256 of step Simple step and direction control interface
Adjustable current control through a potentiometer to set the ref. voltages
Embedded PWM current control with selectable decay mode (fast or slow)
Full set of embedded protections
1. non-dissipative overcurrent
2. Undervoltage lockout
3. Thermal shutdown
4. Short-circuit
Compatible with RAMPS and similar open-source solutions for FFF 3D printers
Very compact footprint: 15 x 20 mm
Package:
1*ST820
1*Heatsink
Note : ST820 drivers need firmware adjustments to function, if you need more information,pls contact us!
×
×
×
×
×
×
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Cloudray 80W CO2 Laser Power Supply 110V for CO2 Laser Engraver MYJG-80W
1500W 30A DC-DC Step Up Boost Converter 10-60V to 12-90V In 10-60V Out 12-90V
5PCS TMC5160 V1.2 SPI Stepper Motor Driver
Cheetah v1.1b 32bit Board TMC2209 UART Silent Board Marlin 2.0 SKR mini E3 TMC22
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Direct Voltage
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by