[3DMakerWorld] Pololu Tic T834 USB Multi-Interface Stepper Motor Controller

Description

Key Features:
Easily add basic control of a bipolar stepper motor to a variety of projects
Support six different control interfaces
Open-loop speed or position control of one bipolar stepper motor
Selectable microstep modes up to 1/256-step resolution
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I2C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and ships with soldered header pins and terminal blocks. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).
Item Specifics
Model: Tic T834
Motor driver: DRV8834
Control interface: USB; non-inverted TTL serial; I2C; RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage: 2.5 V
Maximum operating voltage: 10.8 V
Continuous current per phase without heatsink: 1.5 A
Maximum current per phase with cooling: 2 A
Maximum step rate: 50000 PPS
Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
Reverse voltage protection
Size: 1.50″ × 1.05″ × 0.47″
Weight: 8.4 g