3 CNC Geckodrive G-210x's+Extras Stepper motor Driver Gecko Router Mill Plasma

Description

These Come with a ONE YEAR Factory ONLY Warranty  if you receive a defective Gecko Drive (which is VERY rare)  You need to log onto Geckodrive.com and fill out their RMA form, then send the drive to them for replacement or repair allow a few days, after they have checked the Driver, for return of repaired or replaced product.  By Purchasing these Drivers you agree to the above
You are buying THREE  Brand new Fresh from the Factory Geckodrive G-210x's with MICROSTEPPING
Due to my volume buying power, you can buy these for less from me.Besides having a great price, i include
EXTRAS.
I also include a complete amp control resistor set required by this driver to set the amps for your motor. This set sells for .99 in my store and has 12 amp range sizes.
The G210X is the newest stepper drive from Geckodrive and is a drop-in replacement for the G210; at its core is a G201X and a G901X step pulse multiplier, allowing for full step, half step, 5 microstep and 10 microstep resolution. It is built around our already proven CPLD design similar to the G203V and the G320X. The G210X adds many new features and is an excellent successor to the original G210.
Specifications (Click any underlined feature for a more detailed explanation):
Silent 20kHz PWM switching
Mid-band resonance damping
7A 80VDC power rating
Full step, half step, 5 microstep or 10 microstep selectable resolution
Optoisolated step / direction
No low-speed vibration
STEP and DIRECTION is +3.3VDC and +5VDC compatible at 2.5mA
Recirculate mode during STANDBY greatly reduces motor heating
No external 470uF capacitor is required
Power-on RESET
Morphs to full step at highter speeds to maximize motor torque
DIRECTION is clocked in on the active step pulse edge
No internal jumpers
All settings done using a 10 position DIP switch
Universal step and direction COMMON
PROBLEMS with the Shipment -- Communicate with us ONLY BY
EBAY MESSAGE.
DO NOT communicate with the paypal email
beginning alice.hubbard, this is an order
Depository email only, we do not monitor it.
Important note about SHIPPING:
·
ON
Multiple item orders only,
NOT on single item orders
,
SHIPPING COST totals can become UNREASONABLY HIGH due to the necessity for Ebay to add up all of the individual shipping costs for an estimated “not to exceed” total ship cost.
A high ship cost total on your order will be corrected by us, but only if you place your multiple order and WAIT to PAY,  UNTIL after we send you an invoice with COMBINED shipping.
Don’t use a cart
to order your multiples because it forces you to pay immediately on checkout, and, we can’t then invoice you for combined shipping on your order once you have paid.
Thanks for reading and be sure to Google Hubbard CNC to see our glowing reviews and other spectacular deals we have online!
THE MESSAGE ABOVE ONLY APPLIES TO PEOPLE ORDERING MORE THAN ONE TYPE OF ITEM FROM OUR STORE!